
Easily Fix Loose or Drummy Tiles
If you have sections of tiles at your property that have a hollow or drummy sound, or are showing signs of movement, then it’s likely that the tile adhesive underneath is letting go or wasn’t properly set when the tiles were laid.
Floor or wall tiles can lose adhesion and become loose for a number of reasons, with water damage and structural movement among the most common causes.
Loose tiles from water damage is a common problem in the laundry or kitchen where water can leak onto the tiles, making its way underneath, loosening the tile adhesive. Similarly, hot water spills on tiles is another common cause of tiles becoming loose, as it causes rapid expansion of the tile placing a lot of pressure on the adhesive.
Structural movement of the substrate underneath the tiles will often cause large areas of tiles to become loose. Most modern tile adhesives contain flexible polymers that help to prevent tiles from coming loose through this movement. However, older tiled areas typically have a cement adhesive, which can be weakened through such movement.
When you’re faced with the problem of loose or drummy tiles, there are a few options you can consider to fix the problem. One is to pull up the tiles and have them re-laid, which can be expensive and also very inconvenient.
Another option is to use a product like our StickIt Tile Repair Kit to quickly and easily re-glue the loose and drummy tiles in place, without the need to pull up any of the tiles.
The StickIt Tile Repair Kit allows for the adhesive to be injected under the tile to fill the hollow area where the adhesive has failed. This will then securely re-bond the tile to the substrate underneath, fixing the tile back into place.
With this process, you can quickly and easily repair the tiles that need attention, without causing any mess or interruption to your life at home.
So, if you have a problem with loose tiles our Shalex StickIt Tile Repair Kit is a simple DIY solution.











